RAMS by trade · UK
Asbestos removal RAMS (licensed work overview)
Create supporting RAMS structure for asbestos-related works — specialist plans still required. Describe the job, review suggested risks and method steps, and download a professional PDF.
Typical scope
- Licensed removal support
- Ancillary works near ACM
- Soft strip with ACM present
- Decontamination unit interfaces
- Air monitoring coordination
- Reoccupation interfaces
SafeForJob does not replace a licensed contractor's plan of work. Use this to keep site interfaces, welfare and emergency arrangements clear for the wider team.
Quick answer
Licensed asbestos work requires specialist plans of work under the Control of Asbestos Regulations. This page helps contractors structure site-specific RAMS that sit alongside — not replace — those plans.
Primary topic: asbestos method statement. UK contractors — review every document before you issue it. SafeForJob does not replace competent judgement or HSE guidance.
What usually goes wrong
These are the operational gaps that make generic Word RAMS fail on the next site.
Plan of work missing from pack
Clients expect the CAR plan plus clear site RAMS.
Welfare/DCC vague
Transit and hygiene routes must be drawn.
Other trades too close
Exclusion and phasing essential.
Example
Ancillary works outside an enclosure
Built from one job description. You review and adjust every item before issuing it.
Job description
Carry out M&E isolation in a plant room adjacent to a licensed enclosure at Millbrook Mill. Transit routes agreed, negative pressure monitored by the licence holder, no entry to enclosure by M&E team.
Activities identified
- General site work
- Manual handling
Method (6 steps)
- 1.Arrive and sign in. Arrive at Millbrook Mill plant room, report to the Millbrook Estates site contact, sign in and complete any site induction.
- 2.Brief the team. Brief all operatives on this RAMS, the COSHH assessments and the emergency arrangements. Record attendance.
- 3.Disconnect and remove existing equipment. Disconnect and remove the existing equipment. Lower or carry it using mechanical aids or team lifts as planned.
- 4.Install new equipment. Position and fix the new equipment to the manufacturer's instructions.
- 5.Clear up and remove waste. Clear the work area, remove waste from site (including recovered refrigerant and hazardous waste) and leave the area safe.
- 6.Hand over and sign out. Hand over to the Millbrook Estates site contact, report anything outstanding and sign out.
Main risks (1 in total)
Manual handling
Residual MediumWho: Operatives
- Use mechanical aids (trolleys, sack trucks, hoists) for heavy items
- Team lifts for items too heavy or awkward for one person
- Route planned and cleared before moving items
- Operatives trained in safe lifting techniques
- Gloves with good grip and safety footwear
What to get right on this document
CAR plan first
Licensed work needs a plan of work by the licence holder.
Site interfaces
How other packages stay out of the enclosure area.
Emergency arrangements
Exposure incidents and medicals per specialist procedures.
Quick answer
Licensed asbestos work requires specialist plans of work under the Control of Asbestos Regulations. This page helps contractors structure site-specific RAMS that sit alongside — not replace — those plans.
What good looks like on a UK site
SafeForJob does not replace a licensed contractor's plan of work. Use this to keep site interfaces, welfare and emergency arrangements clear for the wider team. Name the site, the people at risk, and the sequence that keeps them safe. Generic paragraphs that could apply anywhere are the first thing a principal contractor rejects.
How SafeForJob helps
- Describe the job in plain English and get suggested activities, risks and method steps
- Edit every line before you download or issue
- Reuse a previous RAMS and catch old client or site names
- Attach or create COSHH assessments where hazardous substances appear
What this page is not
This page is not HSE approval, legal advice or a substitute for competent judgement. It helps you draft a clearer asbestos method statement document for a named job. You remain responsible for reviewing and issuing it.
Related reading
See what a RAMS is, the free RAMS generator, and HSE guidance on managing risks.
Related pages
- GuidesWhat is a RAMS?RAMS means risk assessment and method statement — usually one site-specific pack for a construction or maintenance job. Practical UK guidance for contractors — with links to free tools.
- RAMS by tradeElectrical RAMSCreate a site-specific electrical RAMS online. Describe the job, review suggested risks like safe isolation and work at height, and download a professional PDF.
- RAMS by tradeHVAC RAMSCreate HVAC and refrigeration RAMS online: rooftop units, split systems, refrigerant recovery and brazing. Suggested risks and method steps you review before issue.
- RAMS by tradePlumbing RAMSCreate plumbing and heating RAMS online: boiler swaps, pipework, unvented cylinders and drain-downs. Suggested risks and method steps, reviewed by you.
- RAMS by tradeRoofing RAMSCreate a roofing RAMS online covering edge protection, fragile roofs, falling objects and weather. Suggested controls and method you review before issue.
- RAMS by tradeGroundworks RAMSCreate a groundworks or excavation RAMS online: buried services, trench collapse, plant movement and public interface. Review every suggestion before issue.
- RAMS by tradeFit-out RAMSCreate a fit-out or shopfitting RAMS online: partitions, ceilings, dust, occupied premises and out-of-hours work. Reviewed by you before issue.
- RAMS by tradeFire & security RAMSCreate RAMS for fire alarm, CCTV and access control installation: system isolations, ceiling work, occupied buildings. Review every suggestion before issue.
- RAMS by tradeScaffolding RAMSCreate scaffolding rams online for UK sites. Suggested risks and method steps matched to the job — you review every item before issue.
Questions
- Can software write a CAR plan of work?
- No — that remains with the licensed contractor's competent persons.
- Non-licensed work?
- Still needs risk assessment and controls; don't downplay it.
- Do I need RPE training records?
- Yes where RPE is used — track competence separately.